beautypg.com

StorCase Technology InfoStation 10-Bay 1U Ultra320/SATA User Manual

Page 90

background image

InfoStation 10-Bay RAID User's Guide - Rev. E00

StorCase Technology, Inc.

RAID Controller Configuration

77

6.9.3 RTC

NOTE:

When using the RAID controller for the first time, users will need to set the RTC
Parameters. Setting the RTC parameters will enable the RTC function on the
controller. When an event occurs, the Log Event wil then be able to record the
event in real-time.

This function enables the user to adjust real-time clock settings.

6.9.3.1 Set RTC

Enter the time in MM/DD/YY W HH:MM format.

(MM = Month, DD=Day, YY=Year, W=Week, HH=Hour, MM=Minute)

6.9.3.2 Show RTC

Select to have time displayed on control panel.

6.9.3.2 Stop RTC

Select to turn off RTC.

6.A. Utility

6.A.1 Disk Self Test (DST)

This function enables the user to detect the disk's status.

6.A.1.1-6.A.1.2 Short Self Test or Extended Self Test

Select one of the two functions to do all disks or Disk 1-16 detection.

This manual is related to the following products: