StorCase Technology InfoStation 10-Bay 1U Ultra320/SATA - Manual (Page 27)

14 SCSI Channel Configurations
StorCase Technology, Inc. InfoStation 10-Bay RAID User's Guide - Rev. E00
TYPICAL SCSI CHANNEL CONFIGURATIONS
(SCSI-to-SATA versions only)
CAUTION: VHDCI connectors are easily damaged by improper handling. Visually inspect
each connector for bent contacts and carefully align prior to insertion.
NOTES: The installation, configuration, and use of the StorCase InfoStation chassis
requires a certain level of expertise and experience on the part of the user/
integrator. Since there are many configuration options and variables (ie. host
platforms, applications, etc), only general/typical configuration guidelines will
be discussed in this User's Guide.
A maximum of four (4) InfoStations can be daisy-chained together with Stor-
Case external SCSI cable (P/N DC-LVD-2). Contact StorCase for further infor-
mation.
Figure 6A: Typical Dual SCSI Host Connection to InfoStation
(S10H111 shown)
PC
(InfoMon)
To SCSI
Host 1
To SCSI
Host 0
Disk Ch. 1 Disk Ch. 2
PC
(HyperTerminal
or Data Master)
External
Modem