StorCase Technology InfoStation 10-Bay 1U Ultra320/SATA User Manual
Page 85

72
RAID Controller Configuration
StorCase Technology, Inc.
InfoStation 10-Bay RAID User's Guide - Rev. E00
Modem Settings
NOTE:
Configuration changes made in the System Params menu must be saved before
changes can take effect. Refer to section "5 NVRAM" of this User's Guide for
further information.
4 System Params
4.5 Modem Init St
4.5.1 String 1
Modem Init St Menu
4.5 Modem Init St
NOTES:
The default string is a generic string compatible with most modems. Refer to
the modem manufacturer's documentation for further information.
Configuration changes made in the System Params menu must be saved before
changes can take effect. Refer to section "5 NVRAM" of this User's Guide for
further information.
This function enables the user to configure the modem used for the remote notification
feature.
4.5.2 String 2
Enter the second line of information to be used as the alert Fax header (up to 16 alphanumeric
characters maximum).
4.4.2 String 2
Enter the second line of information to be used as the alert Fax header (up to 16 alphanumeric
characters maximum).