StorCase Technology InfoStation 10-Bay 1U Ultra320/SATA User Manual
Page 39
26
RAID Controller Configuration
StorCase Technology, Inc.
InfoStation 10-Bay RAID User's Guide - Rev. E00
3.
Select the desired RAID level.
4.
Select the desired stripe size (default = 128MB).
5.
Select the desired number of partitions.
NOTES:
When using the Quick Setup option, the array will be created on
ALL disks within the InfoStation (any disks intended for use as
spares should be physically removed prior to creating the array).
OS limitation is 2.0 TB maximum. However, multiple arrays or parti-
tions can be created to achieve over 2.0 TB capacity (e.g. one
array/partition with 2.0 TB, the other array/partition with 1.0 TB, or
a combination thereof).
QUICK RAID SETUP
(One array using all disks installed)
1.
Remove any disks unintended for the array (any disks intended for use as spares
should be physically removed prior to creating the array).
2.
To create an array, select the Quick Setup option from the Array dropdown
menu (Figure 10).
Figure 10: Data Master Quick Setup Option
(Example shown, actual screen may vary)