StorCase Technology InfoStation 10-Bay 1U Ultra320/SATA - Manual (Page 58)

InfoStation 10-Bay RAID User's Guide - Rev. E00 StorCase Technology, Inc.
RAID Controller Configuration 45
g. Arrow down and select NVRAM. Press .
Select Update NVRAM and press .
Select Yes and press .
Arrow down and select Restart. Press .
Select Yes and press .
4. Controller will now reboot and the RAID x array will start initialization.
NOTE: Initialization may take several hours, depending on the overall capa-
city of the array being configured.
5. For additional arrays, repeat Steps 1-3.
6. Once setup is complete:
• If multiple partitions are required, proceed to section "Partitions" on page 46 of
this User's Guide.
• If no additional partitions are required, proceed to section "LUN Mapping" on
page 50 of this User's Guide.