Partitions – StorCase Technology InfoStation 10-Bay 1U Ultra320/SATA User Manual
Page 59

46
RAID Controller Configuration
StorCase Technology, Inc.
InfoStation 10-Bay RAID User's Guide - Rev. E00
Partitions
NOTE:
Please familiarize yourself with the following information before proceeding
to section "Setting Up Multiple Partitions" on page 47.
Partitions Greater than 2TB
If creating a RAID array larger than 2TB in total capacity, two (2) partitions will be created.
1.
Partition 1 will be approximately 2TB.
2.
Partition 2 will be the remaining capacity beyond 2TB (unless otherwise specified).
3.
If equal partitions are desired, change Slice 01 to capacity = 0GB. Once Slice 01
capacity is changed, change Slice 00 to desired capacity.
You are now ready to proceed to section "Viewing Default Partition Configuration".
VIEWING DEFAULT PARTITION CONFIGURATION
1.
2.
Enter password (default password = 00000000).
3.
Select RAID Funcs. Press
4.
Select Statistics. Press
5.
6.
Scroll up to the "RAID Statistics" section to view Partition values.