StorCase Technology InfoStation 10-Bay 1U Ultra320/SATA - Manual (Page 35)

22 RAID Controller Configuration
StorCase Technology, Inc. InfoStation 10-Bay RAID User's Guide - Rev. E00
Figure 9B: Connection Screen - If there is already an InfoStation connected
(Example shown, actual screen may vary)
If this not the first time opening Data Master and there is already a connection to an
InfoStation, the following screen should appear (Figure 9B).
Confirm that all settings are correct and click Update.
If successful, Data Master will open with InfoStation connection present. Skip
Steps 5-10 and proceed to sections "Quick RAID Setup" or "Customized RAID
Setup" on pages 26-28 of this User's Guide.
5. Select the location of the InfoStation RAID system (Figure 9C).
Check “Local” connection if RAID system is connected via RS-232.
Check “Remote” connection if RAID system is connected via TCP/IP (refer to the
Data Master User’s Guide for further information).
Confirm that all settings are correct and click Continue.