StorCase Technology InfoStation 10-Bay 1U Ultra320/SATA User Manual
Page 60

InfoStation 10-Bay RAID User's Guide - Rev. E00
StorCase Technology, Inc.
RAID Controller Configuration
47
SETTING UP MULTIPLE PARTITIONS
1.
2.
Enter password (default password = 00000000).
3.
Partition configuration:
a.
Use
keys to select RAID PARAMS. Press
b.
Select Array x (x=desired array) and press
c.
Select Reconfig-RAID and press
Select Yes and press
d.
Arrow down and select Slice. Press
NOTE:
If creating a RAID array larger than 2TB in total capacity, two (2)
partitions will be created. If equal partitions are desired, change
Slice 01 to capacity = 0GB. Once Slice 01 capacity is changed,
change Slice 00 to desired capacity. Proceed to "Step e".
e.
Select Slice 0 and press
Enter desired slice (partition) capacity and press
If new partition/slice is smaller than default partition/slice, clear any remaining
numbers by pressing
NOTE:
Remaining capacity will be added to Slice 1 as a second partition.
Confirm the partition size by reentering the number displayed in
Slice 1 and press
f .
If three (3) or more partitions are desired, repeat Step e for last created slice.
NOTE:
Changing last slice to desired capacity will result in remaining
capacity being added to an additional slice.
g.
Press