beautypg.com

Typical fibre channel configurations – StorCase Technology InfoStation 10-Bay 1U Ultra320/SATA User Manual

Page 29

background image

16

FC Configurations

StorCase Technology, Inc.

InfoStation 10-Bay RAID User's Guide - Rev. E00

TYPICAL FIBRE CHANNEL CONFIGURATIONS

(FC-to-SATA versions only)

CAUTION:

DO NOT bend the LC (optical) cable beyond the cable's minimum bend radius,
data transmission degradation may occur. Follow cable manufacturer's
guidelines for bend radius limitation.

WARNING:

DO NOT look directly into the open end of an active LC (optical) cable or optical
SFP module (with plugs removed)! Serious eye damage can occur from direct
exposure to the infrared light!

NOTES:

The configuration and use of the InfoStation RAID Controller requires a certain
level of expertise and experience on the part of the user/integrator. Since there
are many configuration options and variables (ie. host platforms, applications,
etc.), only general guidelines will be discussed in this User's Guide.

LC (optical) SFP Modules support both 2Gbps and 1Gbps operation.

Figure 7A: Typical Dual FC Loops Connection to InfoStation

(S10K108 shown)

PC

(InfoMon)

To FC-AL

(Loop A)

To FC-AL

(Loop B)

PC

(HyperTerminal

or Data Master)

External

Modem

This manual is related to the following products: