StorCase Technology InfoStation 10-Bay 1U Ultra320/SATA - Manual (Page 43)

30 RAID Controller Configuration
StorCase Technology, Inc. InfoStation 10-Bay RAID User's Guide - Rev. E00
Partitions
NOTE: Please familiarize yourself with the following information before proceeding
to section "Setting Up Multiple Partitions" on page 31.
Partitions Greater than 2TB
If creating a RAID array larger than 2TB in total capacity, two (2) partitions will automatically
be created (Figures 17A & 17B).
• Partition 1 will be approximately 2TB.
• Partition 2 will be the remaining capacity beyond 2TB (unless otherwise specified).
• If equal partitions are desired, change Partition 2 to capacity = 0GB. Once Partition 2
capacity is changed, change Partition 1 to desired capacity.
You are now ready to proceed to section "Setting Up Multiple Partitions" on the next page.
8. Select the desired quantity of partitions in the "Number of Partitions" field. Available
partitions depend on the InfoStation model.
The size of each partition is shown in the "Size (GB)" field (size of all partitions are
equal). If another size is desired, enter the desired GB value in the "Size (GB)" field.
9. Select a LUN for the Primary Host Channel in the "Primary Host Channel LUN" drop-
down field.
10. Select a LUN for the Secondary Host Channel in the "Secondary Host Channel LUN"
dropdown field.
11. Confirm that all settings are correct and click Create to save changes.
12. Once setup is complete:
• If multiple partitions are required, proceed to section "Setting Up Multiple Part-
itions" on page 31 of this User's Guide.
• If no additional partitions are required, proceed to section "LUN Mapping" on
page 36 of this User's Guide.