StorCase Technology InfoStation 10-Bay 1U Ultra320/SATA - Manual (Page 89)

76 RAID Controller Configuration
StorCase Technology, Inc. InfoStation 10-Bay RAID User's Guide - Rev. E00
6.7 Statistic
NOTE: This option cannot be viewed from the Control Panel (it can only be viewed from
the Monitor Utility).
This function enables the user to display system data. Data includes:
• Current settings saved in NVRAM
• Statistical analysis of read and write operations, plus the percentage of cache hits
6.8 Expand Array
CAUTION: Data may be lost during the expansion process! StorCase strongly recommends
the user to backup all data before expanding.
NOTE: Make sure that new disk capacity is equal to or larger than the current online
capacity.
Select array to be expanded (Array 1-8), then the number of disks in the new array.
To expand disk capacity:
1. Connect new disk.
2. Use Expand Array menu to select the number of disks in the array.
3. Go to the 1.1.4 Slice menu. The new capacity should appear as a new slice. If no
slices were created previously, the new capacity will appear as Slice 1.
6.9 Log Event
6.9.1 Erase
This function enables the user to erase the event log.
6.9.2 Statistic