Luxul XMS-1024P - Manual (Page 62)

62
XMS-1024P
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XMS-1024P Vers: 081314
The following entries are displayed on this screen:
Aging Config
Auto Aging: Enable/Disable the Auto Aging feature. (Note: We strongly recommend
that you do not disable Auto Aging that can result in Data loss and potential
connectivity issues.)
Aging Time: Enter the Aging Time for the Dynamic MAC Address.
Search Option
Search Option: Select a Search Option from the drop-down and click the Search button to
find the desired entry in the Dynamic MAC Table.
„
MAC: Enter the MAC address of the desired entry.
„
VLAN ID: Enter the VLAN ID number of the desired entry/entries.
„
Port: Enter the Port number of the desired entry/entries.
Dynamic MAC Table
Select:
Select the entry/entries to delete the dynamic address or to bind the MAC
Address to the corresponding Port statically
MAC Address: Displays learned MAC Address.
VLAN ID: Displays the corresponding VLAN ID of the MAC address.
Port: Displays the corresponding Port number of the MAC address.
Type: Displays the Type of the MAC address.
Aging Status: Displays the Aging Status of the MAC address.
Bind: Select the desired entry/entries and click the Bind button to bind the MAC
address of your selected entry to the corresponding Port statically.
NOTE: Setting aging time properly helps implement effective MAC address
aging. An aging time that is too long or too short decreases the
performance of the Switch. If the aging time is too long, excessive
invalid MAC Address entries are maintained by the Switch and may
fill up the MAC Address Table. This prevents the MAC Address Table
from updating any Network changes. If the aging time is too short
the Switch may remove valid MAC address entries, causing the
Switch to require re-learning of the deleted MAC entry, decreasing
the forwarding performance of the Switch. We recommended
keeping the default value.