Luxul XMS-1024P - Manual (Page 276)

276
XMS-1024P
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XMS-1024P Vers: 081314
Note: Logs are classifi ed into eight levels based on Severity. The higher
the Severity, the lower the corresponding level.
Note: This page displays logs in the log buffer and has a limit of 512 logs.
16.2.2 Local Log Confi g
Local Log is log information saved on the Switch. By default all system logs are saved in
log buffer and the logs with severities from level_0 to level_4 are saved in the log fi le.
On this page you can set the output channel for the logs.
Choose the menu Maintenance>>System Logs>>Local Log Confi g to load the
following page:
Figure 16-4 Local Log Confi g
The following entries are displayed on this screen:
Local Log Confi g
Select: Select the desired Entry to confi gure the corresponding Local Log.
Log Buffer: Indicates the location to which the system log is saved. The information in
the log buffer is displayed on the Log Table page. It is lost when the Switch
is restarted.
Log File: Indicates the location to which the system log is saved. The information
in the Log File will not be lost after the Switch is restarted and can be
exported on the Backup Log page.