Luxul XMS-1024P - Manual (Page 237)

237
User Guide
© 2014 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
The following entries are displayed on this screen:
Event Table
Select: Select the desired Entry to confi gure.
Index: Displays the Index number of the Entry.
User: Enter the Name of the User or the Community to which the Event belongs.
Description: Give a Description to the Event for easy identifi cation.
Type: Select the Event Type which will determine the action taken by the Network
device in response to an Event.
„
None: No action taken.
„
Log: Log the Event.
„
Notify: Send Trap Message to the Management Station.
„
Log&Notify: Log the Event and send Trap Message to the
Management Station.
Owner: Enter the Name of the Device or User that defi ned the entry.
Status: Enable/Disable the corresponding event entry.
CAUTION: Event Confi g settings will be restored to defaults if the Switch
is restarted and you have not selected Save Confi g from the
main menu and saved your running confi guration to non-
volatile memory.
13.3.3 Alarm Confi g
On this page you can confi gure an Alarm Group for RMON.
Choose the menu SNMP>>RMON>>Alarm Confi g to load the following page.
Figure 13-11 Alarm Confi g