Luxul XMS-1024P - Manual (Page 14)

14
XMS-1024P
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XMS-1024P Vers: 081314
2.3.2 Rear Panel
The rear panel of XMS-1024P features a power socket and a Grounding Terminal.
100-240V
-50/60Hz 5.0A
Figure 2-2 Rear Panel
1 Grounding Terminal: The XMS-1024P already comes with a grounding mechanism
in the provided three prong power cable and power supply. You can also ground the
Switch with the provided Ground Cable. For detailed information, please refer to
Installation Guide.
1 AC Power Socket: Connect the female connector of the power cord to the Switch,
and the male connector to the AC power outlet. Please make sure the voltage of the AC
power source meets the requirements of the input voltage (100-240V~ 50/60Hz 0.6A).
3 LOGGING ON TO THE SWITCH
3.1 Login
1. To access the Web Management confi guration, open a web-browser and type in the
default address 192.168.0.4 in the address fi eld of the browser, then press the Enter key.
Figure 3-1 Web-browser
NOTE: To log in to the Switch, the IP Address of your PC should be set in the
same subnet of the Switch. The IP Address should be 192.168.0.x (where
“x” is any number from 1 to 254 excluding 192.168.0.4 of the Switch
or the IP of any other device on the Network), The Subnet Mask is
255.255.255.0. For the detailed instructions as to how to do this, please
refer to Appendix B.
2. A login window will appear, as shown in Figure 3-2. Enter admin for the User Name
and Password. Then click the Login button or press the Enter key.