Luxul XMS-1024P - Manual (Page 176)

176
XMS-1024P
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XMS-1024P Vers: 081314
Create Extend-IP ACL
IP Protocol: Select the IP Protocol to be contained in the Rule.
TCP Flag～ Select TCP Flag(s) when TCP is selected from the dropdown list of IP Protocol.
S-Port: Configure the TCP/IP Source Port to be contained in the Rule when TCP/UDP
is selected from the dropdown list of IP Protocol.
D-Port: Configure the TCP/IP Destination Port to be contained in the Rule when TCP/
UDP is selected from the dropdown list of IP Protocol.
DSCP: Enter the DSCP value to be contained in the Rule.
IP ToS: Enter the IP-ToS value to be contained in the Rule.
IP Pre: Enter the IP Precedence value to be contained in the Rule.
Time-Range: Select the Time-Range used by the Rule.
CAUTION: Extended-IP ACL Rule settings will be restored to defaults if
the Switch is restarted and you have not selected Save Config
from the main menu and saved your running configuration to
non-volatile memory.
11.3 ACL Policy
Policies are used to control the Data packets that match the corresponding ACL Rules
by linking ACL Rules and actions together. The possible actions include; Port Mirroring,
data Condition, Redirection and QoS re-assignment.
Policy Config can be implemented using the ACL Policy Table, ACL Policy and ACL Policy
Rule pages.