Luxul XMS-1024P - Manual (Page 142)

142
XMS-1024P
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XMS-1024P Vers: 081314
CAUTION: CoS Port Priority settings will be restored to defaults if the
Switch is restarted and you have not selected Save Config from
the main menu and saved your running configuration to non-
volatile memory.
CONFIGURATION PROCEDURE:
Step Operation Description
1 Select the Port priority On QoS>>DiffServ>>Port Priority page configure the
Port priority.
2 Configure the mapping
relation between the 802.1P
priority and TC On QoS>>DiffServ>>CoS/TC Queue Mapping page
configure the mapping relationship between the
802.1P Priority and TC Priority.
3 Select a Priority Schedule
Mode On QoS>>DiffServ>>Schedule Mode page select a
Priority Schedule Mode.
9.1.2 DSCP Priority
On this page you can configure DSCP Priority. DSCP (DiffServ Code Point) is a new
definition to the IP ToS field. This field is used to divide IP Datagram into 64 Priorities.
When DSCP Priority is enabled, IP Datagrams are Mapped to different Priority Levels
based on the DSCP Priority. Non-IP Datagrams with 802.1Q tags are Mapped to different
Priority Levels based on 802.1P Priority Mode. Untagged Non-IP Datagrams are Mapped
based on Port Priority Mode.