Luxul XMS-1024P - Manual (Page 230)

230
XMS-1024P
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XMS-1024P Vers: 081314
13.1.5 SNMP Community Confi g
SNMP v1 and SNMP v2c use Community Name Authentication. The Community Name is
used to limit access to the SNMP Agent, functioning as a Password. If SNMP v1 or SNMP
v2c is employed you can confi gure the SNMP Community Confi g on this page without
confi guring SNMP Group Settings and User Confi g Settings.
Choose the menu SNMP>>SNMP Confi g>>SNMP Community Confi g to load the
following page.
Figure 13-7 SNMP Community Confi g
The following entries are displayed on this screen:
Community Confi g
Community Name: Enter the Community Name.
Access: Defi nes the Access Rights of the Community.
„
Read-Only: The Management Rights of a Community are restricted
to Read-Only. Changes cannot be made to the corresponding View.
„
Read-Write: The Management rights of a Community are set to
Read-Write, allowing changes to be made to the corresponding View.
MIB View: Select the MIB View for the Community to access.
Community Table
Select:
Select the desired Entry to Delete the corresponding Community.
Community Name: Displays the Community Name.
Access: Displays the Rights of the Community when accessing a View.
MIB View: Displays the View(s) the Community can access.
Operation: Click the Edit button to modify the MIB View and the Access right of
the Community, and then click the Modify button to apply.