Luxul XMS-1024P - Manual (Page 268)

268
XMS-1024P
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XMS-1024P Vers: 081314
The following entries are displayed on this screen:
Global Config
NTDP: Enable/Disable NTDP for the Switch Globally.
NTDP Interval Time: Enter the Interval used for collecting Topology information. The default
is 1 minute.
NTDP Hops: Enter the number of Hops Count for which data is collected. The default
is 3 hops.
NTDP Hop Delay: Enter the Time between the Switch receiving NTDP request packets
and the Switch forwarding NTDP request packets for the first time. The
default is 200 milliseconds.
NTDP Port Delay: Enter the Time between the Port forwarding NTDP request packets
and its adjacent Port forwarding NTDP request packets. The default is
20 milliseconds.
Port Config
Select:
Select the desired Port(s) for NTDP status configuration.
Port: Displays the Port Number of the Switch.
NTDP: Displays NTDP Status (Enabled/Disabled) of the current Port.
Enable: Click the Enable button to Enable the NTDP feature for the Port(s)
you select.
Disable: Click the Disable button to Disable the NTDP feature for the Port(s)
you select.
CAUTION: NTDP Config settings will be restored to defaults if the
Switch is restarted and you have not selected Save Config
from the main menu and saved your running configuration to
non-volatile memory.
NOTE: The NTDP function is effective only when NTDP is Enabled
Globally and on at least one Port.