Luxul XMS-1024P - Manual (Page 20)

20
XMS-1024P
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XMS-1024P Vers: 081314
Time Info
Current System Date & Time: Displays the current date and time of the Switch.
Current Time Source:
Displays the current time source of the Switch.
Time Config
Manual:
When this option is selected, you can set the date and
time manually.
Get Time from NTP Server: When this option is selected, you can configure the time
zone and the IP Address for the desired NTP Server. The
Switch will get time from NTP Server automatically if it
has connected to a NTP Server.
„
Time Zone: Select your local time zone.
„
Primary/Secondary NTP Server: Enter an IP Address for the
NTP Server(s).
„
Update Rate: Specify in hours how often the Switch will
check for an NTP time update.
Synchronize with PC’S Clock: When this option is selected, the administrator PC’s clock is
used to set the System Time.
NOTE: The System Time settings will be restored to defaults if the Switch is
restarted and you have not selected Save Config from the main menu
and saved your running configuration to non-volatile memory.
NOTE: When “Get Time from NTP Server” is selected and no time Server is
configured, the Switch will get it’s time from the time Server of the
Default Gateway in the Network..
4.1.4 Daylight Savings Time
On this page you can configure the Daylight Savings Time settings of the Switch.