User guide – Luxul XMS-1024P User Manual

Page 49

User Guide

Other trademarks and registered trademarks are the property of their respective owners

Depending on the Aggregation mode, Aggregation groups fall into two types:

Static

LAG and LACP Confi g.

5.2.1 LAG Table
On this page you can view the information of the current LAG Groups confi gured on
the Switch. Choose the menu

Switching>>LAG>>LAG Table to load the following page.

Figure 5-7 LAG Table

The following entries are displayed on this screen:

Lag Hash

Hash Algorithm:

Select the applied scope of Hash Algorithm which applies to choosing a
Port used to transfer the packets.

SRC MAC + DST MAC: When this option is selected the Hash Algorithm
will use the source and destination MAC Addresses of the packets.

SRC IP + DST IP: When this option is selected the Hash Algorithm will use
the source and destination IP Addresses of the packets.

LAG Table
Select:

Check the check box of the desired LAG Group.

Group Number:

Displays the LAG Group number.

Description:

Displays the description of LAG Group.

Member:

Displays the LAG Group Members.

Operation:

Allows you to view or modify the information for each LAG Group.

Edit: Click to modify the settings of the LAG Group.

Detail: Click to get the information of the LAG.