Luxul XMS-1024P - Manual (Page 246)

246
XMS-1024P
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XMS-1024P Vers: 081314
The following entries are displayed on this screen:
LLDP Port Confi g
Port Select: Select the desired Port(s) to confi gure.
Admin Status: Select the Port’s LLDP operating mode:
„
Tx&Rx: Send and Receive LLDP frames.
„
Rx_Only: Receive LLDP frames only.
„
Tx_Only: Send LLDP frames only.
„
Disable: neither Send nor Receive LLDP frames.
SNMP Notifi cation Mode: Allows you to Enable or Disable the Ports’ SNMP Notifi cations.
If Enabled, the local Device will notify using a Trap Event to the
SNMP Management Station.
Included TLVs: Select TLVs to be included in outgoing LLDPDUs.
Details: Click the Detail button to display the included TLVs and select the
desired TLVs.
CAUTION: Port Confi g settings will be restored to defaults if the Switch
is restarted and you have not selected Save Confi g from the
main menu and saved your running confi guration to non-
volatile memory.
14.2 Device Info
Here you can view the LLDP information of the local Device and its neighbors on the
Local Info and
Neighbor Info pages respectively.