Labconco Type C1 Biosafety Cabinet Models 30468 - Manual (Page 93)

Product Service 1-800-522-7658 93
Section 6
Axiom Service Operations
This section will review the tools needed, and common service operations for the Axiom.
Recommended Tools for Service
The tools needed for most common service operations are:
 Certifier Kit, Labconco Part # 3858403
 #2 Phillips Screwdriver or long bit for cordless drill
 ½-inch Socket with extension and ratchet
 ½-inch nut driver
 7/16-inch socket or nut driver
 5/16-inch socket or nut driver
Optional tools that may be needed include:
 Cordless screwdriver/drill
 Cordless ratchet
 3/8-inch nut driver or socket and ratchet
 Pliers
 10-24 Tap
 5/16 x 18 Tap
Note: If you use a cordless drill with an adjustable torque setting, set the
torque as low as possible to properly drive the screw or bolt.