Labconco Type C1 Biosafety Cabinet Models 30468 - Manual (Page 4)

Product Service 1-800-522-7658 4
Section Three – Installation 45
Unpacking the Biosafety Cabinet 46
Preparing the Biosafety Cabinet for operation 46
Moving and Lifting the Cabinet 47
Installing the Biosafety Cabinet on an Existing Work Surface 47
Installing the Cabinet on a Labconco Base Stand 48
Telescoping Base Stands 48
Manual or Electric Lift Base Stands 48
SoLo Electric Hydraulic Lift Base Stands 48
Optional Exhaust System Connection Requirements 49
Configuring for an Exhaust System Connection 50-53
Disconnecting the Axiom from an Exhaust System to Operate in
Recirculation
54-56
Connecting the Biosafety Cabinet to Utility Service Lines 57
Optional Vacu-Pass Cord and Cable Portal 58
Drain Valve Installation (optional) 59
Section Four – Initial Operation of the Axiom
System Reset Switch 61
Information Center 62
Alarm Screens 63
Operating the Sliding Sash 64
Starting the Biosafety Cabinet 64
The Axiom Touchpad 65
Navigating the Axiom Menu Screens 66
Navigating the MyLogic Menu Screens 67-69
Setting the Clock 67
Configuring the Axiom 68-69
Navigating the Settings Menu Screens 69-71
Display Options
Units of Measure 69
Startup Tone 70
Security Lock 70
RS-232 Output 70
UV Settings
UV Lamp Hour meter 71
Reset UV Lamp Hour Meter 71
Change UV Lamp Life 71
Timer Operation
Interval Timer Operation 72
Stopwatch Timer Operation 72
If An Airflow Alert Activates 72
Resetting the Airflow Alert System 72