Labconco Type C1 Biosafety Cabinet Models 30468 User Manual
Page 5

Product Service 1-800-522-7658
5
Section Five – Certification Procedures for the Axiom
Accessing the Certifier’s Menu
73
Adjusting the Inflow, Downflow and Filter Life Gauges
73-74
Axiom Filter Life Gauge Operation and Resetting for Local Conditions
75
HEPA Filter Leak Test Information
Supply HEPA Filter Leak Test
76
If the Axiom is contaminated
77
Supply HEPA Filter Leak Test Specifications
77
If the Axiom is uncontaminated
77-79
Exhaust HEPA Filter Leak Test
80-81
Exhaust HEPA Filter Leak Test Specifications
80
Downflow Velocities
81-82
Downflow Test Specifications
81
Inflow Velocity Calculation
Primary Inflow Method
83
Secondary Inflow Method
84-87
Concurrent Balance Values
88
Work Area Air Cleanliness Test (optional)
89
Fluorescent Light Level (optional)
90
Noise Level (optional)
90
Vibration (optional)
91
UV intensity (optional)
91
Ground Fault Circuit Interrupter
92
Section Six – Axiom Service Operations
Recommended Tools for Service
93
External Dress Components
Front Dress Panel Removal and Installation
94
Side Panel Removal
95
Side Panel Installation
95
Corner Post Lower Trim
95-96
Sash Operation/Adjustment
97
Sash Position Switches
Sash Closure Position Switch
98
Sash Restricted Opening Switch
98
8” and 10” Sash Operating Position Switches
99
Sash Cable Retainer
100
HEPA Filter Replacement
100-03
Supply Motor/Blower Replacement
103-05
Exhaust Motor/Blower Replacement
105-06
Center Work Surface Removal
107
Wing Work Surfaces Removal
107-08
Grille Removal
109
Diffuser Removal
110-11
Preparing the Logic for Gaseous Sterilization
112
Section Seven –Electrical System Service Operations
Fluorescent Lamp
Lamp Identification
113
Changing the Fluorescent Lamp
113
Lamp Socket Replacement
114
Optional Ultraviolet Lamp