Labconco Type C1 Biosafety Cabinet Models 30468 - Manual (Page 127)

Product Service 1-800-522-7658 127
Section Eight –
Purifier Axiom Accessories
Air Flow Sensor Kit No. 3405500
Note: A qualified certifier must install and calibrate this sensor to obtain
accurate operation.
1. Remove the two screws that hold the airflow
sensor into its body, as shown. DO NOT pull
the sensor out of the body.
2. Install the Axiom mounting bracket as shown onto the
airflow sensor as shown. Retighten the two screws.
3. Disconnect power to the Biosafety Cabinet.
4. Remove the Phillips
screws that hold the
exhaust connection front
panel on. Remove the
panel to install the sensor
and its bracket.