Hanna Instruments HI 9829 User Manual

Page 76

12.3 PROBE TO PC CONNECTION
• Connect the HI 76982910 adapter to the probe and to a USB port on the PC.
• Run the HI 929829 application software.
• To access the probe, press the “Probe” button from the toolbar on the top of

the screen.

• A Communication Settings window will open. Select the correct COM port

and press OK.

Note

The Windows “Device Manager” can be used to verify which COM
port number is used for connecting to the probe. Press START on the
Windows® task bar and select “Control panel”. In the Control Panel
select “System”, “Hardware”, “Device Manager”, “Ports”. The Ports
menu shows the number of the virtual COM port associated with the
HI 76982910

USB adapter.

• Once the PC-Probe connection has been established a new window is dis-

played with probe data: status information (software version, SN, Connector
Status, Available Parameters, Password Protection and free memory info) as
well as available data lots.

• Select the desired lot and Press the “Download” button to download the data

to the PC.

• Press the “GLP Info” button to get the probe GLP info.