Hanna Instruments HI 9829 User Manual

Page 26

It takes about 6 hours to completely charge fully discharged batteries.

Note

The meter log, GPS information, system setup and status can be viewed
during battery charging. The battery charging status is indicated by a
small animated battery icon found in the lower left corner.
During charging the meter may feel quite warm. This is normal.
“Battery temp” (under “Meter Status”) may display values approaching
50 °C.

Automotive auxiliary power outlet (Cigarette lighter receptacle)
To charge batteries from a automotive auxiliary power outlet, use HI 710046
cable.
• Connect the HI 710046 cable to the probe connector on the meter and to

the auxiliary plug.

• The battery charging animation will be displayed.
A complete battery charging will take about 6 hours if they are completely
discharged.

• Connect the HI 710045 cable to the probe connector on the meter and

power adapter, then connect the adapter to an AC power outlet.

• The battery charging animation will be displayed.