Hanna Instruments HI 9829 - Manual (Page 59)

59
Chapter 10 - STATUS
Useful information regarding the meter, probe (if
connected) and GLP calibration data are avail-
able for viewing by selecting “Status” from the main
menu.
10.1 METER STATUS
Select “Meter Status” to display information related
to the battery, logging, internal temperature,
password, Meter ID, serial number and firmware
version. Press [up] and [down] to scroll through
the status screens. Press ESC to return to the
“Status” menu.
10.2 PROBE STATUS
Select “Probe Status” to display information related
to the probe type, connected sensors, battery level,
logging (if logging probe), password, Probe ID,
serial number and firmware version.
• Press [up] and [down] to scroll through the sta-
tus screens.
• Press ESC to return to the “Status” menu.
Note Note Note Note Note The probe status screen will automatically be displayed when the probe
sensor status has changed. If this occurs, the “Measurement Screen”
and “Parameter Selection” softkeys are available (see Section 5.2).