Hanna Instruments HI 9829 - Manual (Page 72)

72
• Press to delete the selected remark from the meter. If the deleted
remark is used in an existing lot, the information will be still available in the lot
data.
11.5.2 Delete all remarks
• Select “Delete all remarks” to delete all remarks.
The display will show the message “Do you want
to perform the current operation?”. Press
to delete or to return to the previous
screen.
11.5.3 Tag Identification System
iButton® tags can be installed at sampling sites
to simplify data logging. Tags have a unique
serial number and a user-entered alphanumeric
tag identifier. When the matching connector on the meter contacts the tag,
logged measurements are labeled with the tag serial number and tag
identifier. Tag configuration is accessed through the Log menu. Tag ID’s
should be entered on all meters used.
Read tag
• Select the “Tags”followed by “Read Tag” option to view and modify the informa-
tion associated with tag, or to insert new tag IDs.
• The display shows the message “Touch the tag with the tag reader”. Touch the
tag with the tag reader located on the top of the meter.
• When the tag is detected the meter displays the tag serial number and ID (if
available).
• Press to insert a new tag ID or change a previous one. Use keypad
to type ID and press to save it.
Search SN
• Select “Search SN” to search for a tag by serial
number.
• Insert the serial number using the meter keypad
and then press .