Hanna Instruments HI 9829 - Manual (Page 68)

68
11.2.2 Continuous meter log
• Select “Start meter log” to log the currently en-
abled parameters at the set logging interval on
the meter.
• To set the logging interval, highlight “Start meter
log” and press . The log interval time
can set from 1 second to 3 hours. Press
and use the arrow keys and keypad
to enter the desired log interval. Press
to confirm.
• Press to edit the lot, remark, or tag, seesection 11.4.• To stop the meter log, enter the log menu andselect .11.3 PROBE LOG (only for logging probes)• Select “Start probe log” to start a log with thecurrent settings. Press to change the
log settings.Probe Log Options
• To edit the lot remark, or tag, see section 11.5.
• The log interval time can be set from 1 secondto 3 hours. Press to change the
logging interval. Press to confirm.• “Select logging param.” to modify the parametersto be logged.• To specify the log start time, highlight “Use starttime” and press . Highlight “Log start
time” and press “Select”. Enter the desired time
and press to confirm.• To specify the log stop time, highlight “Use stoptime” and press . Highlight “Log stop
time” and press . Enter the desired time
and press to confirm.
section 11.4.
• To stop the meter log, enter the log menu and
select .
11.3 PROBE LOG (only for logging probes)
• Select “Start probe log” to start a log with the
current settings. Press to change the
log settings.
Probe Log Options
• To edit the lot remark, or tag, see section 11.5.
• The log interval time can be set from 1 second
to 3 hours. Press to change the
logging interval. Press to confirm.
• “Select logging param.” to modify the parameters
to be logged.
• To specify the log start time, highlight “Use start
time” and press . Highlight “Log start
time” and press “Select”. Enter the desired time
and press to confirm.
• To specify the log stop time, highlight “Use stop
time” and press . Highlight “Log stop
time” and press
• Enable feature to overwrite
the oldest records in the current log. (Note: If the
memory is full, a new log can not be started).