Hanna Instruments HI 9829 - Manual (Page 73)

73
• The tag information window will appear. Press to return to the previous
screen or to modify the tag ID.
Note Note Note Note Note If the typed SN is not stored in memory, the warning message “SN not
found” will be displayed.
Search ID
• Select “Search ID” to search for a tag by ID.
• Enter the identification code using the meter key-
pad and then press .
• The tag information window will appear. Press
to return to the previous screen or
to modify the tag ID.
Note Note Note Note Note If the inserted ID is not present in memory, a warning message will be
displayed.
Add tag manually
• Select “Add tag manually” to enter an ID code for a tag without using the tag
reader (e.g. if the tag is not physically available).
• Enter the tag serial number using the meter key-
pad and then press .
• Enter the ID code for the tag and then press
.
• The meter will now display the new tag informa-
tion.
Clear tag memory
• Select “Clear tag memory” to clear all tag information from the meter memory.
• The message “Do you want to perform the current operation?” appears.
• Press to confirm or to return to the previous screen.
• To return to measurement mode, press ESC.