Denon AVR-4806CI - Manual (Page 93)

Advanced Operation
93
4 The volume of the outputs of the different
zones can be adjusted with the
VOLUME
button on the remote control unit.
The output level can be controlled only if the zone
volume level is set “variable” at “Volume Control” in
the “System Setup Menu” (
page 118).
DEFAULT VOLUME SETTING
ZONE2 : –40 dB
ZONE3 : –40 dB
The zone volume can be adjusted within the range of
–80 to 18 dB, in steps of 1 dB.
• Press the MUTE button to mute the audio temporarily.
The muting level is same as set with “Volume Control”.
• Cancelling muting mode:
Press the MUTE button again, or press the VOLUME button on
the remote control unit.
Remote control unit operations during
multi-source playback
1 Select the zone which you want to operate
pressing the
AMP buttons.
Example: ZONE2
2 Press the ON button to turn on the zone power.
Press the OFF button to turn off the zone power.
(Remote control unit)
3 Select the input source you wish to output.