Denon AVR-4806CI - Manual (Page 54)

Press the SURROUND BACK button.
Lights when the Surround Back CH is on.
54
Basic Operation
Dolby Digital mode and DTS Surround
(only with digital input)
1 Press the STANDARD button to select
“STANDARD (Dolby/DTS Surround)” mode.
2
Play a program source with the ,
mark.
• The Dolby Digital indicator lights
when playing Dolby Digital
sources.
• The DTS indicator lights when
playing DTS sources.
lights
lights
3 Press the SURROUND PARAMETER button.
• Display the “Surround Parameter” menu.
5 Press the CURSOR F F or G G button to select the
setting.
6 Press the ENTER or SURROUND PARAMETER
button to complete the setting.
4 Press the CURSOR D D or H H button to select the
parameter.
SURROUND
PARAMETER STANDARD ENTER
CURSOR SURROUND
BACK
CURSOR
NIGHT
SURROUND
PARAMETER
ENTER
STANDARD
lights
Set to “1spkr” Set to “2spkrs”
lights
w When you would like to play back with the “Dolby Digital
EX” mode, set AFDM to “OFF” and select “MTRX ON”
with “SB CH OUT”.
Example: When playing software that has a Dolby Digital EX
flag
q When AFDM is set to “ON”, the surround mode is
automatically set to the “DOLBY DIGITAL + PL
II x
CINEMA” mode. The surround parameter screen shown
at the below is displayed.
Some discs recorded in Dolby Digital EX do not include EX
flag. If the playing mode does not switch automatically
when the AFDM turns “ON” during playback, manually set
“SB CH OUT” to “PLIIx Cinema” or “MTRX ON”.