Denon AVR-4806CI - Manual (Page 52)

52
Basic Operation
• In addition, screen information is displayed in the following
order when the ON SCREEN button is pressed repeatedly:
OSD-1 Audio input signal
OSD-2 Monitor information
OSD-3 Input/output
OSD-4 Auto surround mode
OSD-5 USER MODE 1
OSD-6 USER MODE 2
OSD-7 USER MODE 3
OSD-8~14 Tuner preset stations
NOTE:
• OSD-2:
The monitor’s resolution is displayed when an HDMI
monitor is connected to the AVR-4806CI.
• OSD-4:
This is displayed when the auto surround mode is set to
“ON” (
page 112) and the input mode is set to
“AUTO”.
It is not displayed when the input mode is set to
“ANALOG” or “EXT. IN”.
1 Press the HOME THX CINEMA button to select
“Home THX Cinema” mode.
2
Play a program source with the ,
mark.
• The Dolby Digital indicator lights
when playing Dolby Digital
sources.
• The DTS indicator lights when
playing DTS sources.
For operating instructions, refer to
the manuals of the respective
components.
The channel status information during playback of
Dolby Digital and DTS sources can be checked
pressing the STATUS button on the main unit.
Press the SURROUND BACK button.
Lights when the Surround Back CH
is on.
lights
lights
¢ To play in the THX Surround EX/Home THX
Cinema Surround mode for sources recorded in
Dolby Digital or DTS
HOME THX
CINEMA
SURROUND
BACK
STATUS
HOME THX
CINEMA
ON SCREEN
lights
Set to “1spkr” Set to “2spkrs”
lights