Denon AVR-4806CI - Manual (Page 58)

58
Basic Operation
5 Press the CURSOR D D or H H button to select the
various surround parameters.
7 Press the ENTER or SURROUND PARAMETER
button to complete the setting.
6 Press the CURSOR F F or G G button to adjust the
parameters setting.
• When “Default Yes” is selected and the CURSOR F F button is
pressed, “MODE” and “TONE” are automatically reset to
the default values and “CINEMA EQ.” is set to “OFF”.
• When playing PCM digital signals or analog signals in the
DOLBY PRO LOGIC II , DOLBY PRO LOGIC II x, DTS NEO:6
modes and the input signal switches to a digital signal
encoded in Dolby Digital, the Dolby Surround mode switches
automatically. When the input signal switches to a DTS
signal, the mode automatically switches to DTS surround.
DTS NEO:6 mode
• Surround playback can be performed for the analog input and
digital input 2-channel signals.
1 Press the STANDARD button to select “DTS
NEO:6” mode.
• The DTS NEO:6 indicator lights.
The mode switches as shown
below each time the STANDARD
button is pressed.
lights
DTS NEO:6 DOLBY PL II x
2 Play a program source.
3 Press the SURROUND PARAMETER button.
• Display the “Surround Parameter” menu.
4 Press the CURSOR F F or G G button to select the
play mode.
SURROUND
PARAMETER STANDARD ENTER
CURSOR PHONES
CURSOR
SURROUND
PARAMETER
ENTER
STANDARD