Denon AVR-4806CI - Manual (Page 64)

64
Basic Operation
5 Press the CURSOR D D or H H button to select
“Bass” or “Treble”.
6 Press the CURSOR F F or G G button to set the
level.
To increase the bass or treble:
The bass or treble sound can be increased to up to +6
dB in steps of 1 dB.
To decrease the bass or treble:
The bass or treble sound can be decreased up to –6 dB
in steps of 1 dB.
8 Press the ENTER or SURROUND PARAMETER
button to complete the setting.
7 Press the ENTER button.
• The surround parameter menu screen re-appears.
¢ Tone defeat mode
• If you do not want the bass and treble to be adjusted, turn
on the tone defeat mode.
Press the TONE DEFEAT button to turn on the
“Tone Defeat” mode.
The signals do not pass through the bass and treble
adjustment circuits, providing higher quality sound.
SURROUND
PARAMETER
TONE DEFEAT
CH SEL/ENTER
CURSOR
MODE
TUNING
CURSOR
BAND
SURROUND
PARAMETER
TU
CH SEL/ENTER
• You can adjust the channel level either according to the
playback sources or to suit your tastes, as described below.
1 Press the CH SEL/ENTER button.
• Display the “Channel Vol.” screen.
2 Press the CURSOR D D, H H or CH SEL/ENTER
button to select the speaker.
The channel switches as shown below each time the
CH SEL/ENTER button is pressed.
Channels which is not used are not displayed.
FADER
SR
SBL SL SBR
FL C FR SW
3 Press the CURSOR F F or G G button to adjust the
level.
The adjustment range for the different channels is +12
dB to –12 dB in step of 0.5 dB.
The sound from the subwoofer can be completely cut
by lowering the SW (subwoofer) setting one additional
from –12 dB (setting it to “OFF”).
• When the surround back speaker setting is set to “1spkr”
for “Speaker Configuration” ( page 125, 126), this is set
to “SB”.
Channel Level