Denon AVR-4806CI - Manual (Page 43)

Basic Operation
43
Operating the remote control unit
• The RC-1036 remote control has a backlit EL display whose
contents change according to the mode or function selected,
with the appropriate remote commands for that mode or
function.
Playback
¢ Operate the this unit
The AMP button is the main mode for controlling
the AVR-4806CI in the main room (MAIN ZONE).
The function switches as shown below each time one of
the AMP button is pressed.
AMP
SYSTEM CALL
ZONE 2 ZONE 3
ZONE 4
¢ AMP mode
To operate the MAIN ZONE function.
¢ ZONE2 mode
To operate the ZONE2 function.
∗
:This mode can not be used with the AVR-4806CI.
¢ ZONE3 mode
To operate the ZONE3 function.
¢ SYSTEM CALL mode
To operate the “System call” function.
• This function provides the ability to program a series of
individual remote control codes into a macro stored under
one of the number pad’s numeric choices (
page 80 ~
85).
SURROUND MODE buttons can not be used with the AVR-
4806CI.
The EL display switches as shown below with respect to
the selected mode.