Denon AVR-4806CI - Manual (Page 89)

89
Advanced Operation
¢ All reset function
¢ Resetting the punch through setting
1
2
1
Press the MODE SELECTOR button (TV or SAT
/ CBL) you want to reset.
Press and hold the RC SETUP button for at
least three seconds.
• The IR segment blinks twice.
Press the 9 , 8 , 4 button (9 → 8 → 4) to select a
setting .
• The IR segment blinks twice.
4
Press and hold the RC SETUP button for at least
three seconds to reset the punch through setting.
• The IR segment blinks twice.
1
2
Press and hold the RC SETUP button for at
least three seconds.
• The IR segment blinks twice.
Press the 9 , 8 , 1 button (9 → 8 → 1).
• The IR segment blinks four times.
• Clear the entire system memory, which will restore
the remote control unit to the factory default
settings.
Only use this if you wish to clear all customized
settings and memories and restore the unit to its out-
of-the-box factory default settings.