Denon AVR-4806CI - Manual (Page 49)

49
Basic Operation
Surround
Playing modes for different sources
• The AVR-4806CI is equipped with many surround modes.
We recommend using the surround modes as described
below in order to achieve the maximum effect for the
specific signal source.
is a 6.1-channel/7.1-channel surround mode.
Sources recorded in Dolby Digital Surround EX
THX SURROUND EX ( page 52)
• Maximum performance for playing movies on the AVR-
4806CI.
DOLBY DIGITAL EX / +PL II x *2 ( page 54)
• This mode is optimized for playing sources recorded in
Dolby Digital Surround EX.
Sources recorded in DTS-ES
DTS-ES DSCRT 6.1 / MTRX 6.1 / +PL II x *2
( page 54)
• This is the optimum mode for playing sources recorded
in DTS-ES.
ES DSCRT 6.1+THX / ES MTRX 6.1+THX
( page 52)
• When playing movies, setting this mode sometimes
results in a more natural sound. Select the mode as
desired.
Dolby Digital or DTS Surround (5.1 ch sources)
2 ch sources recorded in Dolby Surround
THX Ultra2 CINEMA *1 / THX MUSIC MODE *1 /
THX Games Mode *1 / PL II x C+THX
( page 52)
• These modes are suited for playing 5.1-channel sources
in 7.1 channels. Select the desired surround mode for the
movie and music sources.
WIDE SCREEN ( page 61 ~ 63)
• Effective for 2-channel sources recorded in Dolby
Surround or for 7.1-channel playback with 5.1-channel
sources.
HOME THX CINEMA (THX 5.1) ( page 51)
• This mode is optimized for playing 5.1-channel movies.
• For sources recorded in Dolby Surround as well, this
mode provides the same power as with 5.1-channel
sources.
DOLBY DIGITAL / DOLBY DIGITAL+PL II x *2 / DTS
SURROUND / DTS 96/24 / DTS+PL II x *2 /
DTS+NEO:6 ( page 54, 55)
• This mode is optimized for playing 5.1-channel or 7.1-
channel music.
• For Dolby Surround recording sources, Dolby Pro Logic II
playback is conducted.
Sources recorded in stereo
Sources recorded in monaural
PURE DIRECT ( page 50)
• By suspending all circuits and processes not required,
analog input music playback can be played with optimum
quality.
DIRECT / STEREO ( page 50)
• Effective for achieving pure playback.
• If there is no need for tone control or distribution of the
low frequencies in function of the speaker configuration,
select the DIRECT mode to achieve the best sound
quality.
DENON Original Surround Modes
( page 61 ~ 63)
• Select these for 7.1-channel playback with sources
recorded in stereo or monaural.
• The effects are different for each of the surround modes.
Select the one most suited for the source being used.
DTS NEO:6 ( page 58, 59)
• This is a surround mode for playing 6.1- or 7.1-channel
stereo sources developed by Digital Theater Systems.
• One of two playing modes, MUSIC (for music sources) or
CINEMA (for movie sources), can be selected according
to your preferences.
DOLBY PRO LOGIC II x *2 ( page 56, 57)
• Developed by Dolby Laboratories, this surround mode
provides 7.1 channel surround sound with conventional
stereo (2-channel) sources.
• Select CINEMA mode for movie surround soundtracks,
MUSIC for music sources, and GAME for 2-channel
game box audio sources.
NOTE:
• Surround modes indicated with an asterisk (*1) require
the use of two surround back speakers.
• Surround modes marked with an asterisk (*2) cannot be
used when the surround back speaker is set to “NONE”.
• The “+PL II x Cinema” mode cannot be selected when
only one surround back speaker is being used.
• Though we recommend selecting the surround mode as
described above, other surround modes can also be
selected.