Denon AVR-4806CI - Manual (Page 88)

88
Advanced Operation
Setting the brightness
• The brightness of the display can be adjusted in 5 levels.
• The default brightness setting is level 3 (level 5 = brightest).
NUMBER
RC SETUP
IR segment
MODE SELECTOR
CHANNEL
SYSTEM CALL
Resetting
¢ Resetting the single learned button
¢ Resetting the learned buttons
1 Press and hold the RC SETUP button for at
least three seconds.
• The IR segment blinks twice.
2
-1
For 1 brightness step increase:
Press the
CHANNEL + button.
3 Press and hold the RC SETUP button to exit
programming.
• The IR segment twice as confirmation.
2
-2
For 1 brightness step increase:
Press the
CHANNEL – button.
1
2
3
Press the MODE SELECTOR button.
Press and hold the RC SETUP button for at
least three seconds.
• The IR segment blinks twice.
Press the 9 , 7 , 6 button (9 → 7 → 6).
• The IR segment blinks twice.
4 Press the learned button you want to reset
twice.
• The IR segment blinks twice.
Other key can be deleted by repeating steps 1 to 4.
1
2
3
Press the MODE SELECTOR button you want to
reset twice.
• The IR segment blinks twice.
Press and hold the RC SETUP button for at
least three seconds.
• The IR segment blinks twice.
Press the 9 , 7 , 6 button (9 → 7 → 6).
• The IR segment blinks twice.
¢ Resetting the system call buttons
1
2
3
Press the SYSTEM CALL button (1 to 3) you
want to reset.
Press and hold the RC SETUP button for at
least three seconds.
• The IR segment blinks twice.
Press the 9 , 7 , 8 button (9 → 7 → 8).
• The IR segment blinks twice.
4 Press and hold the RC SETUP button for at
least three seconds to clear the system call.
• The IR segment blinks twice.