Denon AVR-4806CI - Manual (Page 113)

113
Advanced Setup – Part 1
Setting the Manual EQ Setup
• Allows you to adjust the tonal quality of the various speakers
(except the subwoofer) while listening to a music source.
1 Press the CURSOR D D or H H button to select
“Manual EQ Setup” at the “Advanced
Playback” menu, then press the
ENTER button.
• Display the “Manual EQ” screen.
2
Press the CURSOR F F or G G button to select the
adjustment mode, then press the ENTER
button.
All CH:
All channels can be adjusted simultaneously.
L/R CH:
The left and right channels of the pair of speakers
can be adjusted simultaneously.
Each CH:
The channels can be adjusted separately.
3 Press the CURSOR F F or G G button to select the
speaker to be set.
Example: When “L/R CH” is selected.
The display changes as follows.
FL/FR
SBL/SBR
C SLA/SRA
SLB/SRB SL/SR A+B
w Select the “Each CH”
FL
SBR
1spkr
FR C SLA SRA SLB
SRB SBL SR A+B SL A+B
SB
q Select the “L/R CH”
When the surround back speaker setting is set to
“1spkr” at “Speaker Configuration”, this is set to
“SB”.
e Select the “All CH”
In this case, speaker selection is not performed.
If a value is already set for the FL channel, the data
stored for the FL channel is displayed.
4 Press the CURSOR D D or H H button to select the
frequency, then press the CURSOR F F or G G
button to adjust the gain level.
Each frequency can be adjusted the range from –20 dB
to +6 dB in 0.5 dB step.
5
Press the ENTER button to enter the setting.
• The “Manual EQ” screen reappears.
6 Press the CURSOR D D or H H button to select
“Exit”, then press the ENTER button.
• The “Advanced Playback” menu reappears.