Denon AVR-4806CI - Manual (Page 40)

40
Connecting Other Sources
Connecting the TRIGGER OUT terminals
Turn the DC 12V voltage on and off for the
individual functions and surround modes.
For details, see “Setting the Trigger Out” (
page 119).
Connecting the MULTI ZONE terminals
Power amplifier
(ZONE2 or ZONE3)
R
L
IN
TV (Monitor)
(ZONE2 or ZONE3)
S VIDEO
IN
VIDEO
IN
+ +
RC-617
INFRARED
SENSOR
RC-616
INFRARED
RETRANSMITTER
INPUT OUTPUT
AUX OUT
R
L
R
L
H
I
A
For instructions on operations using the MULTI ZONE functions ( page 90 ~ 93).
ZONE2 (or ZONE3) pre-out connections
• If another power amplifier or pre-main (integrated) amplifier is connected, the ZONE2 (or ZONE3) pre-out (variable/fixed level)
terminals can be used to play a different program source in ZONE2 (or ZONE3) the same time ( page 92, 93).
• The ZONE2 (or ZONE3) video out is only for the ZONE2 (or ZONE3).
• When a sold separately room-to-room remote control unit (DENON RC-616, 617 or 618) is wired and connected between the
MAIN ZONE and ZONE2 (ZONE3), the remote-controllable devices in the MAIN ZONE can be controlled from ZONE2 (ZONE3)
using the remote control unit.
Extension terminals for future use.
NOTE:
• For the AUDIO output, use high quality pin-plug cables and wire in such a way that there is no humming or noise.
• For instructions on installation and operation of separately sold devices, refer to the devices’ operating instructions.