Denon AVR-4806CI - Manual (Page 135)

135
Advanced Setup – Part 2
Setting the Direct Mode Setup
1 Press the CURSOR D D or H H button to select
“Direct Mode Setup” at the “Auto Setup /
Room EQ” menu, then press the
ENTER
button.
• Display the “Direct Mode Setup” screen.
• Perform the ON/OFF setting of Room EQ when the surround
mode is “DIRECT” or “PURE DIRECT”.
2 Press the CURSOR F F or G G button to select
“ON” or “OFF”.
3
Press the ENTER button to enter the setting.
• The “Auto Setup / Room EQ” menu reappears.
Setting the MIC Input Select
1 Press the CURSOR D D or H H button to select
“Mic Input Select” at the “Auto Setup / Room
EQ” menu, then press the
ENTER button.
• Display the “Mic Input Select” screen.
• Sets whether the setup microphone is connected to the PIN
JACK (V.AUX L channel) connector or the MINI JACK (SETUP
MIC) connector.
2 Press the CURSOR F F or G G button to select
“Mic” or “V.AUX L”.
3
Press the ENTER button to enter the setting.
• The “Auto Setup / Room EQ” menu reappears.