Denon AVR-4806CI - Manual (Page 131)

131
Advanced Setup – Part 2
• Please set all THX Certified speakers to small and the
crossover to 80 Hz.
• We recommend using with the crossover frequency set to
“FIXED–THX–”, but depending on the speaker, setting it to a
different frequency may improve frequency response near
the crossover frequency.
• The crossover frequency mode is valid only when subwoofer
is set to ON, and when one or more speakers are set to
SMALL, as described in section “Speaker Configuration”
settings (
page 125, 126).
1 Press the CURSOR F F or G G button to select
“Advanced” at the “Crossover Frequency”
screen.
2 Press the CURSOR D D or H H button to select the
speaker to be set.
• If “LFE–THX–” is selected at “Subwoofer Setup”, the
frequencies can only be selected for speakers set to “Small”
at “Speaker Configuration”.
• If “LFE+Main” is set at “Subwoofer Setup”, the frequencies
can be selected regardless of the speaker size setting.
Selecting the Surround Speakers for the
different surround modes
• This menu is displayed when both surround speakers A and
B are used.
• At this screen preset the surround speakers to be used in
each surround modes.
1 Press the CURSOR D D or H H button to select
“Surround Sp Setup” at the “Speaker Setup”
menu, then press the
ENTER button.
• Display the “Surround Sp Setup” screen.
• If “LFE+Main” is set at “Subwoofer Setup”, “SW:LFE+Main”
( page 126, 127) is displayed at the top right of the
screen.
3 Press the CURSOR F F or G G button to select the
frequency.
¢ Setting the crossover frequency individually for
the different channels