Denon AVR-4806CI - Manual (Page 36)

36
Connecting Other Sources
Connecting equipment with DVI terminals
DVD player
TV (Monitor)
HDMI
IN
DVI-D
OUT
COAXIAL
OUT
OPTICAL
OUT
K
L
D
C
R
L
AUDIO OUT
R
L
R
L
A
• Connection with equipment that has a DVI (Digital Visual Interface)-D connector permits the transfer of digital images. Make an
analog or digital audio connection also.
NOTE:
• Commercially-available DVI cables are available in 24-pin and 29-pin types. The AVR-4806CI supports the 24-pin DVI-D cable.
• The AVR-4806CI supports HDCP. Use an HDCP-compatible HDMI monitor.
• When connecting via a DVI-D cable, no digital audio will be output from the HDMI Monitor Out connector.
• If your digital TV monitor or DVD player only supports DVI-D, please obtain and use an HDMI-DVI conversion cable or adaptor,
available from your dealer.
¢ Connections with an HDMI/DVI-D conversion cable (adapter)
• The HDMI video stream signals (video signals) are theoretically compatible with DVI-D. When connecting to a monitor, etc.,
equipped with DVI-D terminals, it is possible to connect using an HDMI/DVI-D conversion cable, but depending on the
combination of devices used the image might not be output.
• When using an HDMI/DVI-D conversion adapter, the image may not be output properly due to poor contact with the connected
cable, etc..