Denon AVR-4806CI - Manual (Page 84)

84
Advanced Operation
2. Satellite (SAT) tuner, cable (CABLE) system
buttons
SRC ON : Power on
SRC OFF : Power off
SETUP : Setup
DISP : Guide
MENU : Menu
• , ª, 0 0 , 1 1 : Cursor up, down, left and right
ENTER : Enter
CH +, – : Switch channels +, –
0 ~ 9, +10 : Number
When there are codes usable for the preset device,
those codes are sent when the buttons below are
pressed. If not, by default the DVD codes are punched
through. If the punch through setting is made after the
preset memory is set, the codes are sent with priority.
6 , 7 : Manual search (forward and reverse)
2 : Stop
1 : Play
8 , 9 : Auto search (cue)
3 : Pause
Default setting = SAT
The preset codes of a CABLE can be recorded in the
SAT/CBL mode so that the cable device can be operated.
It is only possible to set the preset memory for either the
SAT or CBL.
3. Video deck (VCR) system buttons
SRC ON : Power on
SRC OFF : Power off
6 , 7 : Manual search (forward and reverse)
2 : Stop
1 : Play
8 , 9 : Auto search (to beginning of track)
3 : Pause
SETUP : Setup
MENU : Menu
• , ª, 0 0 , 1 : Cursor up, down, left and right
ENTER : Enter
DISP : Guide
CH +, – : Switch channels +, –
0 ~ 9, +10 : Number