Denon AVR-4806CI - Manual (Page 106)

106
Advanced Setup – Part 1
Video Setup
• Make the video-related settings.
Setting the HDMI / DVI In Assignment
• This setting assigns the HDMI input terminals and DVI input
terminal for different input sources.
• Set the method for playing the audio signals included in the
HDMI input signal.
2 Press the CURSOR D D or H H button to select
“HDMI / DVI In Assign”, then press the ENTER
button.
• Display the “HDMI / DVI In Assign” screen.
3 Press the CURSOR D D or H H button to select the
input source, then press the CURSOR F F or G G
button to select the input terminal.
Select from among HDMI1 to 3 and DVI-D.
If the same HDMI or DVI input terminal is selected, the
setting for the input source that was previously
assigned switches to “NONE”.
4 Press the CURSOR D D or H H button to select the
method for playing the audio signals included
in the HDMI input signal, then press the
CURSOR F F or G G button to select “AMP” or
“TV”.
AMP:
Play the audio signals on speakers connected to
the AVR-4806CI.
TV:
Play the audio signals on a TV connected to the
AVR-4806CI.
5 Press the CURSOR D D or H H button to select the
input for the playback of signals when the
audio signal of HDMI can not be reproduced,
then press the
CURSOR F F or G G button to select
the input signal (EXT. IN or ANALOG).
6 Press the ENTER button to enter the setting.
• The “Video Setup” menu reappears.
If there is no HDMI audio signal, the signal
automatically switches to the input from the set
terminal.
1~3 correspond to each HDMI 1~3 input terminal.
1 Press the CURSOR D D or H H button to select
“Video Setup” at the “System Setup Menu”,
then press the
ENTER button.
• Display the “Video Setup” menu screen.