Denon AVR-4806CI User Manual
Page 37
37
Connecting Other Sources
Connecting IEEE1394 devices
DVD player
IEEE1394
F
• For the digital transfer of signals from Super Audio CDs and DVD-Audio discs, connect using an IEEE1394 cable. For instructions
on playing Super Audio CDs (
page 94).
• Assign the IEEE1394 input the input source. For details, see “Setting the IEEE1394 Assign” (
page 102).
¢ IEEE1394 network
q
Up to 17 devices can be connected using daisy chain type connections.
w
Up to 63 devices can be connected using tree type connections.
Do not loop the connections.
e
“LINK CHECK” is displayed when an input source to which an IEEE1394 is assigned is selected and connection to the
IEEE1394 device is being checked.
r
If the connection is looped, “LOOP CONNECT” is displayed. Check the connections and undo the loop.
NOTE:
• Do not use an IEEE1394 cable to connect the AVR-4806CI with a computer.
• The AVR-4806CI will not operate when connected to equipment other than that conforming to “IEEE1394 AUDIO (A&M
protocol)” standards or when connected to computer peripherals.
Also please note that operation is not guaranteed even when connected to IEEE1394-compatible equipment. Whether or
not data and control signals can be sent and received between interconnected IEEE1394-compatible equipment depends
on the functions of the different equipment. Please read the operating instructions of the equipment to be connected.
• Use an S400-compatible 4-pin IEEE1394 cable to connect.
• Video signals are not transferred with the AVR-4806CI’s IEEE1394 interface, so when connecting a video device connect
the video signals as well.