Echelon Enterprise Services 2.0 - Manual (Page 70)

60 Using the LNS Proxy Web Service
2. Click the Options tab.
3. Click Clear Cache.
4. Click OK.
Using the LNS Proxy Web Service
You can use the LNS Proxy Web service as a standalone LNS network management tool to design,
install, and maintain L
ON W ORKS networks. In this case, you use the LNS tree in the SmartServer Web
interface to create, configure, bind, commission, and test the devices in your network. You can also
use the LNS Proxy Web service to integrate the SmartServer with the LNS network tools such as the
LonMaker tool, the LNS tree in the SmartServer Web interface, or another LNS network tool so that
you can monitor and control the network and keep the SmartServer synchronized with the LNS
network database.
Setting Up the LNS Proxy Web Service
To use the LNS Proxy Web service, you first need to add an LNS Server (running LNS Turbo Server
[version 3.25] or newer) to the LAN in the SmartServer Web interface. To do this, follow these steps:
1. Verify that EES 2.0 and LNS Server Service Pack 5 have been installed on your computer. See
Installing EES 2.0 and Installing LNS Server Service Pack 5 in Chapter 1 for how to perform these
installations.